Re: timing tractor farmall A

Posted by Dave on January 31, 2001 at 21:12:54 from (158.252.164.139):

In Reply to: timing tractor farmall A posted by Max on January 31, 2001 at 18:50:42:

If the A is the same as a Farmall B you need to remove the little oval cover at the bottom of the clutch bell housing and look for the DC-14 mark on the clutch housing. The DC1-4 mark aligns with a stationary index at the very bottom when No 1 and No 4 cylinders are at TDC. Take the spark plug out of the No. 1 cylinder (cylinder closest to the gas tank) and watch for the piston to get at the top of the compression stroke and then look up into the bottom of the bell housing and you should be able to see the markings. Static time it at DC-14, at high speed it should advance to something before DC-14. I'm not sure right off what the advance should be.

Good Luck - you'll need a flash light.

Follow Ups:

• Re: Re: timing tractor farmall A Merlin@i-55.com 03:20:42 02/01/01 (0)
• Re: Re: timing tractor farmall A Dave 21:16:38 01/31/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: timing tractor farmall A Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]