Re: Loader hydraulics for a 300.

Posted by Denny Frisk on February 01, 2001 at 12:04:27 from (12.4.181.2):

In Reply to: Loader hydraulics for a 300. posted by RED IRON on February 01, 2001 at 10:03:12:

The 300 hyd system should be about identicle to the system on my Late Super H, capacity & pressure wise. I have 2-1/2" x 30" cyl and can just barely raise the loader all the way up with my 6 qt cap. res. The lift capacity is enough for a big bucket in snow. I've used my loader on large gravel and could lift the completely full bucket, not well, but lift it. I think I tested my hyd. system at 850 to 900 PSI at about a 800 RPM idle. The little Pesco pump of SH's, 300/350's is only about 6 to 7 GPM so the loader will not be fast. But It SURE Beats a shovel!

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Loader hydraulics for a 300. Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]