Re: Adjusting the valves on a Super C

Posted by Dave G on February 03, 2001 at 19:50:25 from (158.252.164.237):

In Reply to: Adjusting the valves on a Super C posted by Ray in Pa. on February 02, 2001 at 16:23:53:

The idea is that you need to make sure the valves will completely seat. So there needs to be clearance when they are shut. I just watch the valves work as I slowly crank the engine over and set each cylinders valves when that cylinder is at TDC on the compression stroke. This is easy to keep straight in you head.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Adjusting the valves on a Super C Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]