Re: Draw bar/sprayer compatibility

Posted by Tyler (MD) on February 09, 2001 at 17:32:24 from (207.172.74.130):

In Reply to: Draw bar/sprayer compatibility posted by Anders on February 09, 2001 at 07:49:27:

Here's the rig that my dad and I have for our Ford 640.

It bolts to the drawbar and hooks in with the top link on the 3pt system. When the barrel is full and dad is standing on the back to spray, everything's fine until we start up a hill. The front end gets light but has never come off the ground. You can use a sleeve adapter (From 1 1/8 to 1 3/8 shaft), with a new pump. Need a regulator, some hose, clamps, wand, and you're good to go.

Grandpa made this sprayer unit years ago. Dad and I modified it for use spraying fence rows with roundup.

Tyman

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Draw bar/sprayer compatibility Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]