Farmall & IHC Tractors Discussion Board |
Re: 460 needs choked to death
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by dick on February 10, 2001 at 08:27:24 from (199.239.12.58):
In Reply to: 460 needs choked to death posted by steel rider on February 10, 2001 at 04:06:51:
Sounds like you're not getting enough fuel. Is your main metering screw out far enough? Assuming the 460 carb. is something like that on Hs and 300s, the screw should be out about 2 1/2 to 3 full turns (counterclockwise off the seat) as your initial guess, before you tune the carb. The idle screw should be out about 1 turn before tuning. You should also check the flow to the carb. and the screens as the other posts have suggested. Good luck.
Follow Ups:
Home
| Forums
Today's Featured Article -
History of the Cockshutt Tractor - by Danny Bowes (Dsl). The son of a very successful Toronto and Brantford, Ontario merchant, and himself quite an entreprenuer, James G. Cockshutt opened a business called the Brantford Plow Works in 1877. In 1882, the business was incorporated to become the Cockshutt Plow Company. Along with quality built equipment, expedious demand and expansion made Cockshutt Plow Works the leader in the tillage tools sector of the farm equipment industry by the 1920's.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|