Re: 560 wide front end

Posted by George on February 18, 2001 at 03:30:09 from (207.75.138.53):

In Reply to: 560 wide front end posted by Daniel on February 17, 2001 at 17:25:51:

Daniel,
Yes it will fit, BUT you will have to make 4 spacers to mount it under the bolster, seems like they are about 1 1/2" long made mine out of bar stock 1 3/4"dia. and drilled a hole in the center on a lathe but you could use flat metal also. mine is a factory w.f. don't know about a schwartz I used wheels off an old Allis Chalmers #60 combine the bolt pattern on those front ends is pretty common, seems like my J.D. wheels will fit also Good Luck George

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 560 wide front end Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]