Re: Re: saginaw three point

Posted by Denny Frisk on February 19, 2001 at 08:18:57 from (12.4.181.2):

In Reply to: Re: saginaw three point posted by speed bump on February 18, 2001 at 22:09:16:

A little clarification required, If your going to pull heavy draft loads, with no down force on the back of the tractor the factory U-shaped drawbar should be used. For example look at what puller's do with their drawbars. Those draft loads are distributed better through the axle carriers into the rear tub. The swinging drawbar mount concentrates the forces on the bottom of the transmission case. If Your going to carry heavy loads like large round hay bales on a 3-point hitch spear that's a different heavy load. I've never seen anything about what the Saginaw 3-point can handle as far as weight.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: saginaw three point Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]