Re: Super C Engine Rebuild

Posted by gene b on March 04, 2001 at 20:17:20 from (63.25.166.188):

In Reply to: Super C Engine Rebuild posted by Frank Wade on March 03, 2001 at 19:24:28:

might want to wait till you tear it down to see what you have a three in bore or a 3 1/8 bore and block no as the dia of the sleeves is important should be 3.300 at the bottom where the rubber seals go check the serial no on the block and go from there as the blocks were changed most suppliers have the info on this conformatic sets run 350 for 3 1/8 hi-comp pistons and sleeves with bngs for crank

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Super C Engine Rebuild Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]