|
Farmall & IHC Tractors Discussion Board |
Hydraulic Pump on IH 424 keeps on blowing oil seal
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Steve in MD on March 11, 2001 at 15:31:22 from (207.172.242.163):
I rebuilt the hydraulic pump(replaced the O-rings) on an IH 424 Utility and noticed not long afterward that the crankcase oil level was very high and realized that hydraulic fluid got in there somehow. I took the pump off, and saw that the oil seal moved out of its seat and got torn up. I got another seal and was extra careful when I installed it. Once again, I had hydraulic fluid in the crankcase soon afterword. I posted this problem on the "tractor talk" board several weeks ago. I got several replies that suggested that the pump was worn to the point where the pressure behind the seal was too great and is pushing the seal out. Since I didn't have this problem prior to my messing with the pump - I can't understand why this would be as I have been very careful to clean and reassemble the pump. So I gave it one more try - and just yesterday it blew again! Any suggestions on my next steps before I buy a new pump? Any suggestions on where to get a pump at the best price? Thanks for the help! - Steve in MD
Follow Ups:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
