Re: FINAL DRIVE OIL

Posted by Haas on March 12, 2001 at 06:03:11 from (129.37.117.46):

In Reply to: FINAL DRIVE OIL posted by bob[pa] on March 11, 2001 at 11:00:00:

There is a fill hole with plug on the inside of each final drive housing. It will have a square socket hole in it for inserting a square wrench to remove the plug. It's just like the fill plug on top of the transmission. If you have implements bolted to the drawbar bolt holes, the plugs may be behind those. Fill to the bottom of the hole. There is no drain. You have to remove the pan. Get new gaskets before you do that. Use 90W gear oil to refill.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: FINAL DRIVE OIL Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]