Re: FARMALL A REAR RIM BOLTS

Posted by F20II on March 16, 2001 at 09:04:30 from (207.202.173.200):

In Reply to: FARMALL A REAR RIM BOLTS posted by catmando on March 16, 2001 at 06:12:44:

The nuts should be hex, the bolts should have square heads on them, this so they will not turn when you are tightening the nuts. It is very hard to find square headed nuts anymore so some people are using hex headed bolts in there place. Make for a real bad day if these hex bolts and nuts are rusted up, you almost have to cut them off with a torch or nut driver. There is a place that sells square headed bolts and someone listed them a little while back but forgot who there were. I may self look around the bone yards when I get to one or while ording a part from a bone yard ask them if the can ship me a few square headed bolts I may need. I have even welded points on the hex headed nuts to make square bolts & nuts.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: FARMALL A REAR RIM BOLTS Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]