Re: IH 574 wiring harness

Posted by the tractor vet on March 19, 2001 at 19:03:28 from (216.196.12.86):

In Reply to: IH 574 wiring harness posted by MikeM (WA) on March 19, 2001 at 17:36:36:

You should be able to get it from Case I/H, if not then you will have to buid one ,I get into that at least twice a year on the ones that come through the shop when we can't get the tailor made ones. The wire end are DELCO you can get them from any Delco jobber the had part is crimping then ,to get the female end out of the plug take a cotter pin and fill it flat to fit in the notch and push in and pull out .

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: IH 574 wiring harness Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]