Re: wiring harness for C

Posted by Haas on March 20, 2001 at 05:33:33 from (129.37.117.21):

In Reply to: wiring harness for C posted by Ronnie on March 19, 2001 at 18:45:27:

I you want, I can scan and send the diagram in My C manual to you. Send me an E mail if you want it. However, if your tractor has been converted to 12 volts and/or has had the cutout relay replaced with a regulator, the diagram will not be the same. The wiring on these old tractors is so simple that you do not really need a wiring harness. You can wire it yourself by going to the automotive store and buying wire and connectors. Only reason for the harness is if you are concerned about originality.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: wiring harness for C Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]