Re: '53 Super A value

Posted by Haas on March 28, 2001 at 05:51:25 from (129.37.117.231):

In Reply to: '53 Super A value posted by Ga-Scott on March 27, 2001 at 15:55:42:

If you got it for $700 and it runs, you got an excellent price! If you have only basic tools, you can do the valve job yourself. Get a gasket set and take the head off and take it to an engine shop. The only tools in addition to wrenches that you need are a torque wrench and feeler gages to set the valve clearance. Also, check the block to make sure it is not cracked out behind the carburator. Lot's of them froze and cracked at that location.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: '53 Super A value Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]