Re: super a final drive lubricant

Posted by Haas on April 08, 2001 at 18:46:17 from (129.37.117.114):

In Reply to: super a final drive lubricant posted by neil on April 08, 2001 at 16:49:16:

YOu can use either 90W gear oil or HyTran (universal tractor fluid) in the final drives. Grease is not the proper lubricant. Someone had leaking seals or gaskets and tried to fix it by using grease. As Big Fred says, you need to get new gaskets for the final drive pans and then remove the pans and clean them out and the grease off the gears. Put the pans back on with the new gaskets (use some gasket sealer on them) and fill er up to the bottom of the fill hole.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: super a final drive lubricant Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]