Re: setting a pressure plate

Posted by Zonie on April 15, 2001 at 19:44:30 from (209.180.112.223):

In Reply to: setting a pressure plate posted by davem on April 15, 2001 at 12:27:01:

Dave,
According to my operator's manual,You set the gap to 3/16" ( clutch pedal should have Free movement of 1 1/8", measured between the point of contact of clutch pedal and the transmission cover ). You adjust this with the clevis on the rod that goes from the pedal to the clutch shaft.
Hope you understand this.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: setting a pressure plate Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]