Re: Re: Super A (Broken off Bolt Heads)

Posted by Dave T on April 22, 2001 at 11:35:56 from (63.20.49.172):

In Reply to: Re: Super A (Broken off Bolt Heads) posted by Dave T on April 22, 2001 at 11:31:29:

Before you start drilling, another method is to take a round drift punch or pin punch, and grind a 20 degree angle on the end. Catch the top of the bolt with your new chisel, and tap it with your hammer in the direction you would normally try to remove it. Soak it first with a good penetrating oil.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Super A (Broken off Bolt Heads) Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]