Re: Question bout my H

Posted by The Undertaker on April 27, 2001 at 05:01:24 from (64.40.66.200):

In Reply to: Question bout my H posted by 1PWRFULH on April 26, 2001 at 14:54:32:

Before repairing an "H" we had been pulling some tree stumps out and experienced same. Removed the lower bolster and dropped the pivot shaft. Found the thrust bearing had bad wear and allowed the pivot shaft to move up against the cavity in the upper bolster, rounding it out. Consequently, the boss on bottom of upper bolster cut a depression ring into the top side of the pivot shaft plate. I'd look after it afore it causes real damage to the upper bolster casting!

"TU"

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Question bout my H Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]