Re: RE:Help Hydrolics on 400D

Posted by kurt on May 01, 2001 at 02:59:22 from (64.109.118.246):

In Reply to: RE:Help Hydrolics on 400D posted by Farmall43 on April 30, 2001 at 22:50:56:

One way to check the hydrostatic valves are
to take them off the tractor and pressure
check them. If the valves do not hold
pressure then that could be part of the
problem. You said that the pump could be
bad, well if the pump will not generate
the needed pressure then fixing the valves
wont do much good. And you would have to
replace the pump.

Follow Ups:

• Re: Re: RE:Help Hydrolics on 400D JohnIH 05:12:33 05/01/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: RE:Help Hydrolics on 400D Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]