Re: Final drive capacity.140

Posted by Haas on May 04, 2001 at 06:06:31 from (129.37.117.228):

In Reply to: Final drive capacity.140 posted by GEE on May 04, 2001 at 05:57:32:

Why did you have to take a tire off??? Surely not to get the final drive pan off. Anyway, not sure how much the final drives hold, but what you do is be sure to put a new gasket and then reinstall the pans. Then fill up to the bottom of the fill hole that is on the inside of the final drive housings. It's located about the same level as the drawbar bolt holes and has a square recess to insert a tool to turn it. Some folks say to avoid leakage problems around the gasket (since the level is above the gasket of the pan) to fill only to just below the gasket level. If you use a new gasket and put some silicone gasket sealer on it, you should not have a problem.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Final drive capacity.140 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]