Re: 350 utility has stumbling and stalling problems

Posted by dick on May 04, 2001 at 11:41:23 from (63.120.111.98):

In Reply to: 350 utility has stumbling and stalling problems posted by thomas bowen on May 04, 2001 at 11:27:28:

Does choking it help? If it's running too lean, it should help.

How many turns out are the adjustment screws on your carb? The main jet should be out about one and a half full turns from the seat before doing adjustments.

Have you looked for leakage into the intake manifold? This can cause the tractor to run too lean. If you don't see anything obvious, a test is to CAREFULLY feed unlit propane from one of the small bottles used to sweat copper fittings over the surface and gasket areas of the manifold and see if the engine evens out at some point. If so, you've likely found a leak. Best do this outside.

Let us know how you make out.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 350 utility has stumbling and stalling problems Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]