Farmall & IHC Tractors Discussion Board |
IH 574 3.0 lift drop delay
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Joe (Wa) on May 04, 2001 at 23:55:03 from (198.133.237.130):
Hi IH folks, I am trying to help a friend figure out the 5 second or so delay in his 3.0 hitch on an IH 574. The transmission is presently filled with universal tractor hyd/trans fluid vice the recommended "IH HY-Tran". The filter element was missing and has been replaced. I have an I&T shop manual and operator's manual and have adjusted the the lever(s) links to specs. The load control on the top link moves freely. Doesn't seem to make any difference in what positions any of the four levers are placed, the delayed response is the same, loaded or unloaded, lift or lower, hot or cold. Thanks for any incite you can provide. I have a Case VAC & a 311B, both with eagle hitches and one lever. I am probably just too dumb to figure out all these IH levers. Joe
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|