Re: Anything between sleeve and block?

Posted by The Red on May 07, 2001 at 10:10:50 from (206.246.187.2):

In Reply to: Anything between sleeve and block? posted by Bob in Southwest Iowa on May 07, 2001 at 09:48:39:

Bob on my 1951 H project two years ago, I coated the inside of the cylinder walls and the outside of the sleeves with WD 40. I was able to push all 4 down around half way then tapped them into position with a wood block and hammer.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Anything between sleeve and block? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]