Rockford clutch

Posted by mel on May 11, 2001 at 06:19:44 from (150.113.7.99):

Someone posted a question about the adjustment of the release lever height on a rockford clutch. The I&T manual IH-8 shows a dimension from the point on the lever where the throwout bearing touches the lever to the face of the pressure plate. It also specifies the dimension from the face of the pressure plate to the cover plate. Here are a few of the listed dimentions:
Tactor Cover setting Lever setting
to plate face to plate face

A,B 27/32 2 23/64
C,SA,SC 27/32 2 3/8
Cub 5/16 2 7/32
H 27/32 2 5/32
M (early 1 3/32 2 21/32
M (late) 1 1/32 2 21/32

I believe the early M had an 11" clutch and the late M had a 12" clutch.

Hope this helps somebody.

Follow Ups:

• Re: Rockford clutch Tyler (MD) 17:20:08 05/11/01 (0)
• Re: Rockford clutch mel 06:34:04 05/11/01 (0)
• Re: Rockford clutch mel 06:23:29 05/11/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Rockford clutch Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]