Re: Unsticking Old Rusty H With Hydraulic Jacks??

Posted by Redfan on May 26, 2001 at 04:29:52 from (203.30.255.230):

In Reply to: Unsticking Old Rusty H With Hydraulic Jacks?? posted by The Red on May 25, 2001 at 11:28:18:

I had a similiar problem with a 15-30 Red. The pistons came out but the sleeves were well stuck. I placed a heavy beam under the tractor, tied a high tensile chain around the beam and secured it to the tub of the 15-30. A 20 ton jack was used between the beam and the sleeve. They all come loose, but two of them took all twenty tons and all my nerve to crack them loose. Went off like a 12 gauge.
Perhaps you could use a similiar setup on the bottom of your pistons. Regards, Redfan.

Follow Ups:

• Re: Re: Unsticking Old Rusty H With Hydraulic Jacks?? The Red 04:34:38 05/26/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Unsticking Old Rusty H With Hydraulic Jacks?? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]