Re: Converting to 12 volt system?

Posted by Don on May 26, 2001 at 22:30:52 from (206.72.58.201):

In Reply to: Converting to 12 volt system? posted by Dave Westlund on May 26, 2001 at 18:23:44:

One of the small wires needs to be run over to the battery post on the alternator. It will then be hot all the time. The other wire usually goes to the ignition switch. When you turn on the ignition then that wire is hot. That is the one that excites the alternator. I would think you would probably have to hook up a switch coming from the battery and going to the alternator. You would then need to turn this switch on when you start the tractor and shut if off when the tractor is not running. Plug terminal #1 goes to the switch and plug terminal #2 goes to the alternator battery post. Hope this helps.
Don

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Converting to 12 volt system? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]