Re: Putting remote hydralics on supper C

Posted by Harold Hubbard on June 15, 2001 at 03:58:20 from (209.198.117.132):

In Reply to: Putting remote hydralics on supper C posted by KenB on June 14, 2001 at 18:16:42:

Years ago I had a loader on a Super C. There was a block about one inch thick that bolted in between the hydraulic lines and the touch control block. The lines for the loader valve were plumbed into that block. The loader used an open center valve. I never looked inside it, but I suppose the block diverted the oil through the loader valve and back to the touch control block. The Super C hydraulic system would make one slooow wood splitter.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Putting remote hydralics on supper C Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]