|
Farmall & IHC Tractors Discussion Board |
656G Hydro PTO slips
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by smirkey on June 29, 2001 at 12:15:48 from (199.144.169.245):
We are done with summer work and want to fix the tractor PTO. It slips when cutting heavy hay or even when engaging the baler. It had been fixed before by two "local" shops. about 10yrs ago new discs were put in,but it slipped a few years later. the second guy supposedly rebuilt the hydraulic pump. i'm thinking of pulling it myself and driving it 150 miles to a dealer. any suggestions what may be wrong, or how to diagnosis? how do i remove the unit? any comment or help will be appreciated. did i mention i'm poor because of the gas bill for operating the thirsty thing!!
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
