Re: Stronger Hydraulic Pump for the M?

Posted by Zonie on July 01, 2001 at 22:15:59 from (64.12.104.174):

In Reply to: Stronger Hydraulic Pump for the M? posted by Lugaidh on July 01, 2001 at 14:36:04:

Get a pressure gage that goes up to 1000 psi and screw it into one of the liftall outlets and check your hydraulic pressure.It should be 750-800 psi.
I use a 3" cylinder on my blade and it will lift alot more than the weight of the blade. I once reversed the operation on my cylinder to get down pressure on a home made plow I made and it made pretzles out of my plow.
There's lots of power available if you use the right sized cylinders.
Many cylinders will be marked with maximum operating pressure but that is just the maximum you can operate them with less.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Stronger Hydraulic Pump for the M? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]