Re: ballast resistor for 12v conversion

Posted by BOB[PA] on July 04, 2001 at 12:06:54 from (205.188.199.176):

In Reply to: ballast resistor for 12v conversion posted by dan on July 04, 2001 at 09:25:23:

DAN i use the napa brand RU-6 with no proplems on my super a in order to ckeck must have tractor running and with volt meter check wire right at dist. should be what you are looking for. you must reverse the wires at coil and dist + goes to hot wire coming in - wire goes to dist

please post back with any ?

hope this helps bob

Follow Ups:

• Re: Re: ballast resistor for 12v conversion The Red 13:13:48 07/04/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: ballast resistor for 12v conversion Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]