Re: Engine Running is too fast

Posted by The Red on July 04, 2001 at 15:15:59 from (12.75.197.247):

In Reply to: Engine Running is too fast posted by Texas Red on July 04, 2001 at 15:04:46:

Tr, the H governor should be similar to the 9 series. With the engine off, remove the governor side plate and look at that bottom horizontal bolt. It might be screwed in too far resulting in the fast speed. Turning it counterclockwise will slow down the engine speed.

If that appears similar to this picture, Unbolt the carb from the manifold but leave it hooked to the governor shaft. Work the throttle lever up and down and see if the butterfly in the carburetor is opening and shutting.

Let us know if this helps any.

• H Governor Pix

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Engine Running is too fast Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]