Re: help!! M farmall has no fire.

Posted by Bill Smith on July 08, 2001 at 20:54:07 from (128.242.4.59):

In Reply to: help!! M farmall has no fire. posted by Bill Smith on July 08, 2001 at 13:16:20:

Thanks for the follow ups. They were all good ones. I found my problem and turns out it was the points. They didn't look bad at all but since I took them out to get a closer look I went ahead and rubbed them over a file. Put them back in and had plenty of spark out of the coil wire then. plugged coil wire in cap and checked a plug wire for spark and it was good to go. Put all wires on the plugs and the old M fired right up. Then I had the burden of switching all the parts back to the right tractor. I had to have the little H so it would run too. Thanks for the help you all. I am from Ks too.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: help!! M farmall has no fire. Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]