Re: Baler for Farmall C

Posted by gene b on July 14, 2001 at 11:19:21 from (65.229.174.45):

In Reply to: Baler for Farmall C posted by Luke Petre on July 14, 2001 at 10:41:35:

your C doesent have that much hp but any small pto baler will work just put one 7-8 mower swath with the hay rake put it in low try to get 12-14 or so slices to a bale you will soon learn that the more slices of hay to the bale the better the bale will be the C will do ok just dont hurry have the knife on the plunger sharp and check the plunger for play sideways and you will have fun we used to have tractors that size on balers worked ok it is all in good hay dryness and raking to avoid bunches start out will the smaller windrows then after you are seasoned in the operation you will soon become a pro cousin uses his B JD on a NEW HOLLAND WIRE MODEL 68 gets along just fine glad to help have fun

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Baler for Farmall C Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]