Re: more questions-but almost finished

Posted by The Red on July 31, 2001 at 10:56:19 from (206.246.187.2):

In Reply to: more questions-but almost finished posted by randy h on July 30, 2001 at 19:47:47:

Randy with the engine off and throttle lever in full speed position, remove the side cover on the governor. The lower bolt should be roughly in the position shown in this picture. Loosen the locking nut and turn the bolt counterclockwise to increase upper RPM and then retighten the locking nut.

• Governor in Fast Position

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: more questions-but almost finished Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]