Re: Bent rockshaft rod

Posted by Tyler (MD) on August 15, 2001 at 15:55:44 from (207.172.73.225):

In Reply to: Bent rockshaft rod posted by Nyles Crawford on August 15, 2001 at 05:33:22:

David A of this forum told me to do this:

>>Hey Tyler,
Regarding that bent rod, I found an easy way to straighten it. Mine was also bent to the point of hitting the fender.
Take the rod off and use it like a pry bar up against the drawbar. You can also stick it through one of the holes in the drawbar and pry. The tractor makes a good immovable object to pry against. The bar should have two bends in it, one near the front and one near the rear. You will see them. This job took me about 15 min. Now it is perfect.
David<<

HTH,
Tyman

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Bent rockshaft rod Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]