Farmall & IHC Tractors Discussion Board |
Re: Need help with Farmall M
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by old timer's advice on August 16, 2001 at 22:35:01 from (207.239.97.193):
In Reply to: Need help with Farmall M posted by Todd on August 16, 2001 at 18:14:48:
Todd, If you do need to replace the sleeves in your M, don't do just the 2 that are shot now. We replaced one sleeve in my H, only to have another give out about two months later. I would recommend that you replace all of them with new ones not used. If you replace the shot ones now the others may give you trouble later. Some others may not agree with me, and I am in no way an expert. But if I had only replaced mine with all new ones I would not have needed to go back into her a few months and do everything all over again. I understand your needing or trying to keep the cost down, but if you do all of them now that ol M will probably outlast all of us. Shop around, you can find most anything that may be needed on the net. I have attached a web site that has NOS (new old stock) items for these Old Farmalls, including sleeve sets. After opening the page go to the left side of the screen and click on the "Piston and Sleeve Sets" button then go down the list and see if they have a set that meets your needs. Their prices don't seem to be bad but like anything, someone may be able to find a better price elsewhere. good luck an old timer
Follow Ups:
Home
| Forums
Today's Featured Article -
Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|