|
Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Live hydraulics for a H????
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jim on August 22, 2001 at 05:53:06 from (12.36.154.2):
In Reply to: Re: Re: Live hydraulics for a H???? posted by LarryG on August 22, 2001 at 04:08:01:
If you have the pump made for the super M, it goes between the distributor and the timing gear (it should replace the spacer between the distributor and the timing gear - I think ;o) ). You will probably need the vertical delco distributor as well as there isn't room for the horizonal and the oil filter. This replacement isn't hard but be sure the gear teeth are meshed completely and that you have oil in the inlet before starting the engine --> You don't want to break any gears (lots of work to replace) and you shouldn't run the pump dry. Good luck !
Follow Ups:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
