Farmall & IHC Tractors Discussion Board |
Re: How Do I take an IH-300 out of Storage
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ken Tajchman on August 23, 2001 at 17:22:32 from (207.94.232.78):
In Reply to: How Do I take an IH-300 out of Storage posted by Ken Tajchman on August 23, 2001 at 11:45:08:
Thanks guys, this is just the type of info I need. As for the price... trust me it couldn't be a better price. The unit was used and fully functional through out its working life, through the 70's, and retired mid-early 80's. It was replaced,used occasionally, and then it was parked in the barn one day and never needed again. A friend said to drain all the liquids, and refill all of the associated cavities completely full in order to rewet the dry gaskets. Then drain again and fill to the proper level. This sounds like an extreme. Would this procedure be of any benefit? Speaking of trannies and hydraulics... engines and hydraulics don't scare me in the least. Trannies however do. What do I need to look out for as far as identifying problems with the tranny and drivetrain? How hard is the tranny to work on? The thought of splitting the cases doesn't thrill me, but I would do it if it were't that involved (I.E. expensive specialty tools) a thing to do. What is the likelihood there will be no... oops, almost jinxed it, ...few problems with the tranny, and what are they likely to be? Would it have a 3ph and pto compatible with today's implements? If not what could be done to modernize it? Or would it need to be modernized? Would there be a "work around"? I guess the tractor is inherently a mobile entertainment system, from what you guys are saying. I am almost frothing at the mouth to be out there on that thing. I must however be patient. This will come in time, and hard work.Thanks again, and keep 'em coming. My wife is patching my coveralls as I write, bless her.
Follow Ups:
Home
| Forums
Today's Featured Article -
Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|