Re: Re: H/300 governor rebuilding?

Posted by wh on August 29, 2001 at 11:55:06 from (216.180.38.52):

In Reply to: Re: H/300 governor rebuilding? posted by The Red on August 29, 2001 at 11:16:20:

Just had a set rebuilt on a h. Be sure the pins that hold the weights are not worn or the holes in the weights are not worn. That was my trouble. Caused the tractor to be slow activating the governor. All i had to change was the pins and weights. Added new seal and she runs like a top. Rebuilt carb while I was at it. Now it is somewhat slow starting - most of time does'nt crank until the 2nd piston comes up. Of course that was always the trouble with the h and m series was'nt it.

Follow Ups:

• Re: Re: Re: H/300 governor rebuilding? The Red 14:49:08 08/29/01 (1)
  • Re: Re: Re: Re: H/300 governor rebuilding? wh 06:16:41 08/30/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: H/300 governor rebuilding? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]