Re: Calling H magneto Experts - Hey Red!

Posted by Michael Soldan on September 13, 2001 at 15:16:20 from (216.46.140.186):

In Reply to: Calling H magneto Experts - Hey Red! posted by BTD on September 13, 2001 at 11:11:24:

BTD, you don't need to be real close. some where around TDC and the first mark should work, once running you can pivot the mag on the mounting bolt to get it right on. My expert friend told me to have the mag ready to click on # 1 and as you put it on it may appear to be out of whack but get it in place and the first movement of the engine will fire it at TDC. I had to do this with the M and it fired immediately. My expert friend also says there isn't much to go wrong in a mag, mostly it just needs to be cleaned. The only thing you could go wrong on is being out 180degrees. Check your wiring and it should fire. good luck from Mike in Exeter Ontario

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Calling H magneto Experts - Hey Red! Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]