Farmall & IHC Tractors Discussion Board |
W6 Runs again! I think I'm converted!
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Andrew from Aust on September 25, 2001 at 23:11:40 from (203.108.191.36):
Hey, I thought I should tell you followers of red power about my W6. I don't usually collect the later series Inters preferring the look of the earlier models and various other makes butI decided to get this W6 that was available cheap as a bit of a "work horse" or "shunt" tractor. It has been sitting outside for many years and when I first noticed it was pretty weathered and seized when I leaned on the handle. Any way when I chocked the clutch in I realised the engine was free and that something was adrift in the gearbox. It turned out that someone had reefed on the gearstick selecting two gears and bending the gate inside. Careful work with a big screwdriver fixed this. The engine had compression on three cylinders and had been liberally oiled by the previous owner since he had thought it was seized. I assumed that it had some carbon stuck on a valve as all seemed to be working when I removed the tappet cover. Anyway I soldered a new base in the small start tank which was rusted out and cleaned the fuel line and carby bowl. New oil and an old maggie I had lying in the cupboard completed her. Anyway, half a gallon of petrol later with a touch on the choke and away she went. At first she had a miss which later turned out to be no clearance on one valve. A little adjustment later she was purring like a kitten!! I think I'm converted! Don't worry, she'll get a good life now! Sorry about the essay!
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|