Re: Farmall M Head Torque

Posted by Farmer Bob on September 27, 2001 at 21:05:42 from (66.152.73.220):

In Reply to: Farmall M Head Torque posted by Alan on September 27, 2001 at 19:21:58:

Alan, Torque the head to 110 ft. lbs. in stages starting from one side of the head in the middle and work back and forth across and outward toward each end of the head. I'd take them to 60 then go back and take them to 90 and then finally to 110.

After you get her started and run up to operating temp (You may have to put a piece of cardboard in front of the radiator to make her heat up), shut her down and go back. Remove the valve cover and rocker arm assembly...retorque to 110. You'll be amazed how much it will need. Then reset the valve clearances, button her up and enjoy. After about 20 hours of operation, you may want to go back and give it one last retorque.//FB

Follow Ups:

• Re: Re: Farmall M Head Torque Alan 06:49:27 09/28/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall M Head Torque Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]