|
Farmall & IHC Tractors Discussion Board |
Rebuilding Super C Hydraulics
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Indiana Jones on October 04, 2001 at 05:24:21 from (63.146.82.159):
When I got this Super C it was missing the hydraulics manifoild tubes and all the hydraulic controls up on the steering column. The pump was there but blocked off where the tubes should connect. The pump had been running for years without fluid, so I'm sure it needs to be rebuilt. I have no idea why the tubes and controls had been removed, but something must have gone bad first. I've got the touch control unit and the pump sitting on my workbench. I'm getting the missing parts from a salvage yard. My question is about rebuilding the pump and the touch control. Other than using hydraulics, I don't have any experience working on them. What should I replace in the pump? What should I replace in the touch control unit? I'm hoping I can get these kind of parts at Case IH.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
