Re: Need Touch Control Expert

Posted by J. D. Humm on October 21, 2001 at 17:20:31 from (12.65.217.26):

In Reply to: Need Touch Control Expert posted by Clyde on October 20, 2001 at 17:25:55:

Clyde- got out my service man's hand book for Super C touch control. I looked at the exploded view of the check valve actuator assemblies. I see what you mean about a flat piston top and no way to grab on to it. I didn't have trouble getting mine out. Guess they were slightly out of the bore when I took the head off. Must have a slight ridge worn into the bore that the o ring won't go past.looks to me like air pressure is the only those pistons are going to come out. What if you cleaned and lubricated the cylinder wall while pushing the piston in? I'm sure you've tried everything I am suggesting. Another shot in the dark- get some 2by4 blocks, turn the unit so the piston bores are facing down between the 2by4 blocks and drop the unit on the blocks as gently as possible. I know the thing is heavy and may take two people but it may be worth a try. Shouldn't hurt anything if the unit lands on the wood. Man, I am out of ideas! Maybe a real IH mechanic will see this and respond. Email me at jereh02@msn.com when you get it figured out. Wish I could be more help!

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Need Touch Control Expert Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]