Re: Re: Re: Front end loader on h

Posted by The Red on November 03, 2001 at 09:47:34 from (12.84.243.206):

In Reply to: Re: Re: Front end loader on h posted by FARMALL ED on November 03, 2001 at 09:38:56:

Ed connect hoses to the two outlet liftall pipes. Use the one on the starter side and the one closest to the engine on the clutch side. Those plumb to the bottom of your cylinders. You then will have to fabricate a tree assembly that bolts to the liftall inlet pipe for the return hoses. What I do is unscrew the cap assembly off the belly pump inlet tube. You will then need a

universal joint (that is so you can unhook it to fill the liftall),
a short vertical pipe,
a T connector,
a 6 inch horizontal pipe,
a 12 inch horizontal pipe and
2 90 degree elbows.

You then connect your return lines to the two 90 degree elbows.

Follow Ups:

• Re: Re: Re: Re: Front end loader on h LarryG 06:03:30 11/05/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: Front end loader on h Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]