|
Farmall & IHC Tractors Discussion Board |
50's era - International Cub
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by AFR on November 06, 2001 at 08:06:41 from (207.173.224.6):
Hi all. I need a bit of advice/help - sorry if I ramble on a bit. I have a chance at an old international cub for free. It's a 50's era machine that comes with a front blade, rear wheel weights, a flail mower and has hydraulics in the middle of the tractor (they raise and lower the mower but I'm not clear as to whether they also work the blade). The tractor has been stored outside, where it was parked by the guy that owns it, about four years ago before the guy got sick. He drove it to this spot so I guess it ran before this. Is the tractor worth putting money into it for use around my three and a half hilly acres or would I be better off sinking money into a new yard/garden tractor? The options for new tractors seem sort of dismal though. Not built very heavy, almost disposable etc. My problem is that I don't have a lot of time to play with this thing, and I'll need it to run at least for two years before I get the chance to do any serious work to it. Is this a good gamble? Does anybody have experience in having somebody else work on the engine and mechanical stuff? Would it cost more than a new garden tractor? I'm stuck and I don't really know what to do here. I love the thought of having an actual farm tractor that's capable of doing some real work, but I don't want to end up with it just taking up space in the garage. So I guess the real question is, from a purely practical standpoint, is $2,000.00 better spent on this old tractor or on a completely new one? By the way, what sort of a load can these things pull? I hear they're only about 10hp, although that's real power at the wheels, I don't know how that would translate to dragging a fallen tree, pulling a stump, or hauling a trailer loaded with dirt rocks etc. Thanks very much for any answers that you can provide.
Follow Ups:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
