|
Farmall & IHC Tractors Discussion Board |
Last Chapter Saginaw Hitch
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Clyde on November 15, 2001 at 13:33:09 from (63.146.82.166):
Had some hoses custom made this morning and put them on to finish my SC 3 pt hitch conversion. I put a quick coupler in so I needed a total of 6 hoses, 2 from my touch control manifold to the control valve, 2 from the valve to the quick coupler, and 2 from the quick coupler to the hitch cylinder. The hoses cost about $140. I could have had lighter duty hoses made for about half that. Anyway it works great. About 3 seconds total up or down movement. The control is sensitive and smooth. I was surprised to see how little it loads the engine down. My TC puts a noticeable load on the engine. This thing hardly affects the engine. Maybe its because it has a bigger cylinder than the TC. I've got pictures of the setup showing the manifold adapter, valve control, hoses, etc. Will post as sson as I figure out how to do it.
Follow Ups:
Home
| Forums
Today's Featured Article -
Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
