Re: 1950 Farmall M Fan Belt

Posted by Tom W. on November 18, 2001 at 15:59:42 from (166.94.90.148):

In Reply to: 1950 Farmall M Fan Belt posted by Chad Redding on November 18, 2001 at 15:05:22:

The fan belt is tightened up by making the pully smaller. There should be a lock bolt on the collar in front of the belt. Loosen the lock bolt and take a punch and push the collar counter clock wise until you can take the belt off. You may need some PT blaster to loosen up the thread. WD 40 might work also. When you put the new belt on, just reverse the collar until the belt is snug. It dosen't need to be real tight.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 1950 Farmall M Fan Belt Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]