Re: One Point FH Question

Posted by Hugh MacKay on November 19, 2001 at 02:29:27 from (142.177.108.215):

In Reply to: One Point FH Question posted by Bigtime299 on November 18, 2001 at 08:31:25:

I have two of these tractors which I welded a piece of flat bar to the bottom of the pull bar. I placed it so protruded about 3 inches beyond the end of the pull bar. Before doing this you may want to check out that your fast hitch implements will hitch with thAT PRESENT. ( EXCUSE MY KEYBOARD) SOME WILL NOT. THE PROBLEM I HAVE ALWAYS FOUND WITH THE FACTORY PART IS THAT THE HOLE FOR THE PIN GETS EGG SHAPED VERY QUICKLY, IT RATTLES WHEN NOTHING IS HOOKED TO IT AND FEELS LIKE YOU ARE TOWING A TRAILER WITH A PIECE OF CHAIN.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: One Point FH Question Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]