Re: IH 230 rebuild

Posted by George 2 on January 04, 2002 at 16:40:12 from (216.46.140.73):

In Reply to: IH 230 rebuild posted by TerryC(MO) on January 03, 2002 at 20:33:31:

When you get the head off check it for flatness. These engines are notorious for having warped heads. If the head needs resurfacing, get it done at a machine shop. A warped head could be the cause of both poor compression and antifreeze in the oil. Also check the block and O ring grooves for the sleeves when you have it apart. Broken O rings could also be the cause of antifreeze in the oil. These engines are really simple. I tore down a Super C engine and rebuilt it when I was only sixteen (in 1963).

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: IH 230 rebuild Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]